Table of Contents
Advertisement
4.7.2.7.1 People Counting
Procedure
Step 1
Select Main Menu > AI > Parameters > People Counting > People Counting.
The People Counting interface is displayed. See Figure 4-157.
Step 2
Draw people counting rule.
1) Click
2) Configure parameters.
Parameter
Name
Duration
Filter target
3) Click and hold the left mouse key to draw an area for people counting.
4) Click OK.
Step 3
Click
Parameter
Channel
Figure 4-157
to draw people counting rule.
Table 4-47
Description
Customize the rule name.
Set the minimum time that the object stays until the alarm is triggered.
Click
to filter the target. Check the blue wireframe and adjust the
size of the area with the mouse.
Each rule can set 2 target filters (maximum size and minimum size),
that is, when the passing target is smaller than the minimum target or
larger than the maximum target, no alarm will be generated. The
maximum size should not be smaller than the minimum size.
in both Parameters and Trigger columns, and configure parameters.
Table 4-48
Description
Select a channel from the dropdown list.
259
User's Manual
Advertisement
Table of Contents
