Table of Contents
Advertisement
2.2.25 NVR54-I/NVR54-I/L/NVR44-I Series
● The following figure takes NVR5432-16P-I and NVR5432-16P-I/L series as examples.
● The figure is for reference only. The actual product shall prevail.
No.
Port Name
1
Power button
2
PoE port
3
eSATA port
4
HDMI port
5
VGA port
6
RS232 port
7
Alarm input port (1-16)
Figure 2-70 Rear panel
Function
Turns on/off the NVR.
Built-in switch. It can provide power for IPC.
● 16 PoE ports: 1-8 are ePoE ports (support 300m @ 100M.
800m @ 10M). 9-16 are regular PoE ports.
● Device with 16 PoEs supports 150W total power.
External SATA port. It can connect device with SATA port.
You need to jump the HDD when there is peripherally
connected HDD.
High definition audio and video signal output port. It
transmits uncompressed high definition video and multiple-
channel audio data to displays with HDMI port. The two
HDMI ports support 2-channel high definition HDMI output
of different sources.
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
It is for general COM debugging to configure IP address and
transfer transparent COM data.
● There are four groups: 1-4, 5-8, 9-12 and 13-16.
They receive signals from external alarm source. Alarm
input includes two types; NO (normal open) and NC
(normal close).
● When your alarm input device is using external power,
make sure the device and the NVR have the same GND.
51
User's Manual
Advertisement
Table of Contents
