Step 2
Click
Step 3
Configure the parameters.
Parameter
Protocol Type
Server Address
Port
Auto Report Plan
Step 4
Click Apply.
5.11.16 Register
You can register the Device into the specified proxy server which acts as the transit to enable
the client software to access the Device
Prerequisites
● The proxy server has been deployed.
● The Device, the proxy server and the device running the client software are on the same
network.
Procedure
Step 1
Select Main Menu > NETWORK > Register.
Figure 5-199 Alarm center
to enable the function.
Table 5-62 Alarm center parameters
Description
Select a protocol type.
The IP address and communication port of the PC installed with
alarm client.
Select time cycle and specific time for uploading alarm.
241
User's Manual