Register - Dahua NVR21-4KS3 Series User Manual

Parameter
Protocol Type
Server Address
Port
Auto Report Plan
Click Apply.
Step 4

5.11.16 Register

You can register the Device into the specified proxy server which acts as the transit to enable the
client software to access the Device
Prerequisites
● The proxy server has been deployed.
● The Device, the proxy server and the device running the client software are on the same network.
Procedure
Step 1 Select Main Menu > NETWORK > Register.
Step 2 Click
Step 3 Configure the parameters.
Table 5-70 Alarm center parameters
Description
Select a protocol type.
The IP address and communication port of the PC installed with alarm
client.
Select time cycle and specific time for uploading alarm.
Figure 5-239 Register
to enable the function.
352
User's Manual