Table of Contents
Advertisement
Step 7
Click Finish to complete the setup.
4.2.3 Short-Cut Menu to Register Camera
If you have not register a remote device to a channel, please go to the preview interface to add.
Step 1
On the preview interface,
Move your mouse to the center, there is an icon "+". See Figure 4-47.
Click " +", device pops up interface to add network camera. Refer to chapter 4.1.4.5 Registration
Step 2
for detailed information.
4.2.4 Image
It is to set network camera parameters according to different environments. It is to get the best video
effect.
From main menu->setting->camera->image, you can see the image interface is shown as below. See
Figure 4-48.
Figure 4-46
Figure 4-47
170
Advertisement
Table of Contents
