Multicast - Dahua NVR21-4 KS2 Series User Manual

Parameter
Version
SNMP Port
Read Community
Write Community
Trap Address
Trap Port
Read Only User
Read/Write User
Authentication Type
Authentication
Password
Encryption
Password
Encryption Type
Step 3 Compile the two MIB files by MIB Builder.
Step 4 Run MG-SOFT MIB Browser to load in the module from compilation.
Step 5 On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, and then
select the version number to query.
Step 6 On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.

4.12.8 Multicast

When you access the Device from the network to view the video, if the access is exceeded, the
video will not display. You can use the multicast function to group the IP to solve the problem.
Step 1 Select Main Menu > NETWORK > MULTICAST.
The MULTICAST interface is displayed. See Figure 4-210.
Description
Select the check box of SNMP version(s) that you are using.
The default version is V3. There is a risk of select V1 or V2.
Indicates the monitoring port on the agent program.
Indicates the read/write strings supported by the agent program.
Indicates the destination address for the agent program to send the
Trap information.
Indicates the destination port for the agent program to send the
Trap information.
Enter the user name that is allowed to access the Device and has
the "Read Only" permission.
Enter the user name that is allowed to access the Device and has
the "Read and Write" permission.
Includes MD5 and SHA. The system recognizes automatically.
Enter the password for authentication type and encryption type.
The password should be no less than eight characters.
In the Encryption Type list, select an encryption type. The default
setting is CBC-DES.
Local Basic Operation 280