Table of Contents
Advertisement
Parameter
SNMP Port
Read Community
Write Community
Trap Address
Trap Port
Read-Only Username
Read/Write Username
Authentication Type
Authentication
Password
Encryption Type
Encryption Password
Step 4
Click Apply.
Step 5
Compile the two MIB files by MIB Builder.
Step 6
Run MG-SOFT MIB Browser to load in the module from compilation.
Step 7
On the MG-SOFT MIB Browser, enter the device IP that you want to manage, and then
select the version number to query.
Step 8
On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
5.11.14 Multicast
Background Information
When you access the Device from the network to view the video, if the access is exceeded, the
video will not display. You can use the multicast function to group the IP to solve the problem.
Procedure
Step 1
Select Main Menu > NETWORK > Multicast.
Description
The default version is V3. There is a risk if you use V1 or V2.
Enter the monitoring port on the agent program.
Enter the read and write strings supported by the agent program.
Enter the destination address for the agent program to send the Trap
information.
Enter the destination port for the agent program to send the Trap
information.
Enter the username that is allowed to access the Device and has the read-
only permission.
Enter the username that is allowed to access the Device and has the read
and write permission.
Select MD5 or SHA. The system recognizes the type automatically.
Enter the password for authentication. The password should be no less
than eight characters.
Select an encryption type. The default setting is CBC-DES.
Enter the encryption password.
334
User's Manual
Advertisement
Table of Contents
