Table of Contents
Advertisement
Parameter
Authentication
Password
Encryption Type
Encryption Password
Click Apply.
Step 4
Step 5
Compile the two MIB files by MIB Builder.
Step 6
Run MG-SOFT MIB Browser to load in the module from compilation.
Step 7
On the MG-SOFT MIB Browser, enter the device IP that you want to manage, and then
select the version number to query.
Step 8
On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
5.11.14 Multicast
Background Information
When you access the Device from the network to view the video, if the access is exceeded, the video
will not display. You can use the multicast function to group the IP to solve the problem.
Procedure
Step 1
Select Main Menu > NETWORK > Multicast.
Step 2
Configure the parameters.
Description
Enter the password for authentication. The password should be no less
than eight characters.
Select an encryption type. The default setting is CBC-DES.
Enter the encryption password.
Figure 5-198 Multicast
310
User's Manual
Advertisement
Table of Contents
