Pppoe - Dahua NVR52-4KS2 Series User Manual

Click Apply.
Step 5

5.11.9 PPPoE

PPPoE is another way for the Device to access the network. You can establish network connection
by configuring PPPoE settings to give the Device a dynamic IP address on the WAN.
Prerequisites
To use this function, firstly you need to obtain the username and password from the Internet
Service Provider.
Procedure
Step 1 Select Main Menu > NETWORK > PPPoE.
Step 2 Enable the PPPoE function.
Step 3 Enter the username and password provided by the Internet Service Provider.
Click Apply.
Step 4
Figure 5-230 Added channel
Figure 5-231 PPPoE
354
User's Manual