Table of Contents
Advertisement
Click Apply.
Step 5
5.11.9 PPPoE
PPPoE is another way for the Device to access the network. You can establish network connection
by configuring PPPoE settings to give the Device a dynamic IP address on the WAN.
Prerequisites
To use this function, firstly you need to obtain the username and password from the Internet
Service Provider.
Procedure
Step 1
Select Main Menu > NETWORK > PPPoE.
Step 2
Enable the PPPoE function.
Step 3
Enter the username and password provided by the Internet Service Provider.
Click Apply.
Step 4
Figure 5-216 Added channel
Figure 5-217 PPPoE
335
User's Manual
Advertisement
Table of Contents
