Pppoe; Ddns - Dahua NVR21-4KS3 Series User Manual

Hide thumbs Also See for NVR21-4KS3 Series:

Table of Contents

5.11.9 PPPoE

PPPoE is another way for the Device to access the network. You can establish network connection by

configuring PPPoE settings to give the Device a dynamic IP address on the WAN.

Prerequisites

To use this function, firstly you need to obtain the username and password from the Internet Service

Select Main Menu > NETWORK > PPPoE.

Enable the PPPoE function.

Enter the username and password provided by the Internet Service Provider.

Click Apply.

The IP address appears on the PPPoE page. You can use this IP address to access the

When the PPPoE function is enabled, the IP address on the TCP/IP page cannot be

When the IP address of the Device changes frequently, the DDNS function can dynamically refresh

the correspondence between the domain on DNS and the IP address. You can access the Device by

using the domain.

Prerequisites

Check the type of DDNS that the Device supports and then log in to the website provided by the

DDNS service provider to register domain and other information.

Figure 5-232 PPPoE

User's Manual