Main Bearing, Crankshaft And Cylinder Block Component - Suzuki GRAND VITARA 2005 Service Manual

1D-55 Engine Mechanical:
d) Select new piston so that distance "e" is within
range of distance "d" of new piston.
NOTE
Piston class (1) is marked on piston top as
shown in figure.
Available new piston class
Piston class (1)
47.026 – 47.066 mm
S
(1.85142 – 1.85299 in.)
47.068 – 47.108 mm
T
(1.85307 – 1.85464 in.)
47.110 – 47.150 mm
U
(1.85473 – 1.85629 in.)

Main Bearing, Crankshaft and Cylinder Block Component

1. Cylinder block
2. Flywheel side crankshaft oil seal
3. Main bearing
: Do not apply oil between cylinder block and bearing and between, main bearing
cap and bearing.
4. Thrust bearing
5. Main bearing cap
Distance "d"
6
6
e) Replace piston with selected piston.
f) Check piston protrusion, again.
1
3
7
6. Oil jet
7. Bearing cap seal
: Tighten 20 N⋅m (2.0 kgf-m, 14.5 lb-ft) and 62° by the specified
procedure.
: Do not reuse.
: Apply engine oil to inside / sliding surface.
I5JB0B140132-01
S5JB0B1406068
4
3
5
(a)
I5JB0B140111-01
2