Suzuki GRAND VITARA 2005 Service Manual page 327

19) Remove needle bearing (1) from rear case (2) using
special tool, if necessary.
Special tool
(A): 09913–76010
20) Remove input gear plate bolts (1) from front case (2).
21) Remove input gear assembly (1) and counter gear
assembly (2) from front case (3) using plastic
hammer.
1
3
1
22) Remove front oil seal No.2 (1) from front case (2)
using flat end rod or the like, if necessary.
(A)
1
2
I5JB0A331027-01
1
2
I5JB0A331028-02
3
2
I5JB0A331029-01
1
2
I5JB0A331030-01
Reassembly
1) Install new front oil seal No.2 to front case (1) using
special tool, and then apply grease to oil seal lip.
: Grease 99000–25010 (SUZUKI Super Grease A)
Special tool
(A): 09913–85210
2) Install counter gear assembly (1) to front case (2),
and then install input gear assembly (3).
NOTE
Install input gear plate (4) so as not to hit
counter gear assembly.
1
3
Transfer: 3C-16
(A)
1
I5JB0A331033-01
3
2
1
2
4
I5JB0A331034-02