Oil Pan And Oil Pump Strainer Removal And Installation - Suzuki GRAND VITARA 2005 Service Manual

1E-3 Engine Lubrication System:
Oil Pan and Oil Pump Strainer Removal and
Installation
Removal
1) Drain engine oil referring to "Engine Oil and Filter
Change: in Section 0B".
2) Disconnect oil separator return hose (1) from oil
separator return pipe.
3) Disconnect fresh air vent hose (2) from fresh air vent
union bolt.
4) Loosen closure plate bolts in numerical order ("1"
through "12") evenly and gradually as shown in
figure, and remove them.
5) Remove closure plate (1) from lower oil pan.
"13"
"1"
"2"
"3"
"4"
"5"
"6"
6) Remove oil pump strainer No.1 (1) and oil separator
return pipe (2).
2
S5JB0B1506002
1 2
I5JB0B150005-01
"11" "10"
"9"
"8"
1
"7"
"12"
I5JB0B150006-01
1
I5JB0B150007-01
7) Loosen lower oil pan stiffener bolts in numerical
order ("1" through "4") as shown in figure, and
remove them.
8) Remove lower oil pan stiffener No.1 (1) and No.2 (2).
"2"
1
"1"
9) Loosen lower oil pan bolts in numerical order ("1"
through "4") evenly and gradually as shown in figure,
and remove them.
10) Remove lower oil pan (1) from upper oil pan.
"2"
"4"
11) Remove fresh air vent union bolt (1) from lower oil
pan, if necessary.
1
"4"
2
"3"
I5JB0B150008-01
"3"
1
"1"
I5JB0B150009-01
I5JB0B150010-01