Suzuki GRAND VITARA 2005 Service Manual page 23

Hide thumbs Also See for GRAND VITARA 2005:
Table of Contents

Advertisement

4) Apply engine oil to new oil filter gasket.
5) Screw new filter on oil filter stand by hand until the
filter gasket contacts the mounting surface.
CAUTION
!
To tighten oil filter properly, it is important to
accurately identify the position at which filter
gasket first contacts the mounting surface.
6) Tighten oil filter (1) 3 / 4 turn from the point of contact
with the mounting surface using an oil filter wrench
(2).
3/4
2
7) Replenish oil until oil level is brought to FULL level
mark on dipstick (about 5.1 liters (9.0 lmp pt.)). The
filler inlet is at the top of the cylinder head cover.
Use only engine oil of ACEA standard C3 grade.
Select the appropriate oil viscosity according to the
chart [A].
It is highly recommended to use SAE 5W-30 oil.
NOTE
Note that the amount of oil required when
actually changing oil may somewhat differ
from the data depending on various
conditions (temperature, viscosity, etc.)
Proper engine oil viscosity chart
[A]
5W-30
0W-30
o
-30
-20
-10
0
C
o
-22
F
-4
14
32
I5JB0B020005-01
1,(a)
I5JB0B020006-01
5W-40
0
10
20
30
4
50
68
86
104
I5JB0B020014-02
Maintenance and Lubrication:
8) Check oil filter and drain plug for oil leakage.
9) Start engine and run it for 3 minutes. Stop it and wait
10 minutes before checking oil level. Add oil, as
necessary, to bring oil level to FULL level mark (1)
on dipstick.
2. Low level mark
Engine Coolant Change
WARNING
!
To help avoid danger of being burned, do not
remove degassing tank cap while engine and
radiator are still hot. Scalding fluid and steam
can be blown out under pressure if cap is
taken off too soon.
Change engine coolant referring to "Cooling System
Refilling: in Section 1F".
Exhaust system Inspection
WARNING
!
To avoid danger of being burned, do not
touch exhaust system when it is still hot. Any
service on exhaust system should be
performed when it is cool.
Check exhaust system for loose, damage, leakage, etc.
referring to "Exhaust System Check: in Section 1K".
Air Cleaner Filter Inspection
Check that filter is not excessively dirty, damaged or oily
and clean filter with compressed air from air outlet side
of filter.
Refer to "Air Cleaner Filter Inspection and Cleaning: in
Section 1D".
Air Cleaner Filter Replacement
Replace air cleaner filter with new one referring to "Air
Cleaner Filter Removal and Installation: in Section 1D".
1
2
I5JB0B020008-01
S5JB0B0206005
S5JB0B0206006
S5JB0B0206008
S5JB0B0206009
0B-4

Advertisement

Table of Contents
loading

Table of Contents