Suzuki GRAND VITARA 2005 Service Manual page 443

3) Set shift control lever (2) to gear shift lever case.
4) Install case cover (1) to gear shift lever case (3).
Tighten case cover bolt to specified torque.
Tightening torque
Case cover bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
3
5) Install sheet, boot (1) with boot cover (2) to floor
panel.
Tightening torque
Control lever boot cover bolt (a): 12 N·m (1.2
kgf-m, 9.0 lb-ft)
2
6) Install front console box referring to "Console Box
Components: in Section 9H in related manual".
Fix without bolt type
Removal
1) Remove front console box referring to "Console Box
Components: in Section 9H in related manual".
2) Lift up boots cover (1), boot (2) and sheet (3).
3) With gear shift control case cover (4) pushed down
with fingers, turn it to counter clockwise and take out
shift control lever (5).
2
1
(a)
I5JB0B520009-01
1
(a)
I5JB0A520027-02
2
1
3
5
4
I5JB0B520111-02
Manual Transmission/Transaxle:
Installation
1) Tighten new control lever locating bolts (1) to
specified torque, if removed.
Tightening torque
Control lever locating bolt (a): 10 N·m (1.0 kgf-
m, 7.5 lb-ft)
2) Apply grease to pivot portions and seat, then install
shift control lever.
"A": Grease 99000–25010 (SUZUKI Super
Grease A)
3) Set shift control lever (2) to gear shift lever case.
4) With gear shift control case cover (1) pushed down
by hand, turn gear shift control case cover (1) to
clockwise.
5) Install sheet, boot (1) with boot cover (2) to floor
panel.
Tightening torque
Control lever boot cover bolt (a): 12 N·m (1.2
kgf-m, 9.0 lb-ft)
2
6) Install front console box referring to "Console Box
Components: in Section 9H in related manual".
"A"
1, (a)
I5JB0B520112-01
2
1
I5JB0B520113-01
1
(a)
I5JB0A520027-02
5B-10