Engine And Emission Control System - Suzuki GRAND VITARA 2005 Service Manual

1A-14 Engine General Information and Diagnosis:
Engine and Emission Control System Check
Refer to the following items for the details of each step.
Step
1 Customer complaint analysis
1) Perform customer complaint analysis referring to "Step
1: Customer Complaint Analysis: ".
Was customer complaint analysis performed?
2 Visual inspection
1) Perform visual inspection referring to "Step 2: Visual
Inspection: ".
Is there any faulty condition?
3 DTC check, record and clearance
1) Check for DTC referring to "Step 3: DTC Check, Record
and Clearance: ".
Is there any DTC(s)?
4 Engine basic inspection and fault finding – customer
complaints
1) Check and repair according to "Step 4: Engine Basic
Inspection and Fault Finding-Customer Complaints: ".
Is there any faulty condition?
5 Recheck DTC
1) Recheck DTC referring to "Step 5: Recheck DTC: ".
Is there any DTC(s)?
6 Troubleshooting for DTC
1) Check and repair according to applicable DTC diag. flow
referring to "Step 6: Troubleshooting for DTC (See each
DTC Diag. Flow): ".
Is there any faulty condition?
7 Intermittent problems check
1) Check for intermittent problems referring to "Step 7:
Intermittent Problems Check: ".
Is there any faulty condition?
8 Final confirmation test
1) Clear DTC if any.
2) Perform final confirmation test referring to "Step 8: Final
Confirmation Test: ".
Is there any problem symptom, DTC or abnormal condition?
Step 1: Customer Complaint Analysis
Record details of the problem (failure, complaint) and how it occurred as described by the customer. For this purpose,
use of such an inspection form will facilitate collecting information to the point required for proper analysis and
diagnosis.
Action Yes
Go to Step 2.
Repair or replace
malfunction part, and go
to Step 3.
Record and clear DTC
referring to "DTC
Clearance: " and go to
Step 5.
Repair or replace
malfunction part and
then go to Step 8.
Go to Step 6.
Repair or replace
malfunction part and
then go to Step 8.
Repair or replace
malfunction part(s), and
go to Step 8.
Go to Step 5.
S5JB0B1104004
No
Perform customer
complaint analysis.
Go to Step 3.
Go to Step 4.
Go to Step 8.
Go to Step 7.
Go to Step 7.
Go to Step 8.
End.