Timing Belt And Belt Tensioner Inspection - Suzuki GRAND VITARA 2005 Service Manual

1D-17 Engine Mechanical:
11) Apply sealant "A" to thread of TDC pin cap (1), and
tighten TDC pin cap as specified torque.
Tightening torque
TDC pin cap (a): 20 N·m (2.0 kgf-m, 14.5 lb-ft)
"A": Loctite rhodorseal 5661® (Loctite
rhodorseal 5661®)
12) Install timing belt cover No.1 (1) and timing belt
cover No.2 (2).
Tightening torque
Timing belt cover No.2 bolt (a): 55 N·m (5.5 kgf-
m, 40.0 lb-ft)
1
13) Install accessory drive belt referring to "Accessory
Drive Belt and Idler Pulley Removal and Installation:
in Section 1J".

Timing Belt and Belt Tensioner Inspection

Timing belt
Inspect timing belt for wear or crack.Replace it as
necessary.
Timing belt tensioner
I5JB0B140142-01
Inspect timing belt tensioner pulley for smooth rotation.
Replace it as necessary.
2
(a)
I5JB0B140038-01
S5JB0B1406052
I4RH0A140043-01
I4RH0A140044-01