1E-9 Engine Lubrication System:
5) Remove oil pump chain (1) and oil pump drive
sprocket (2).
6) Remove crankshaft oil seal (1) from gasket holder
plate (2).
7) Remove oil pump chain tensioner (3) from gasket
holder plate, if necessary.
Installation
1) Remove oil and dust from mating surfaces of oil
pump drive sprocket, crankshaft gasket holder plate
and cylinder block.
2) Install oil pump chain tensioner (1) to gasket holder
plate (2), if removed.
3) Install oil pump drive sprocket (1) with oil pump chain
(2).
I5JB0B150032-01
4) Install gasket holder plate (1) with new gasket to
cylinder block.
Tightening torque
Gasket holder plate bolt (a): 14 N·m (1.4 kgf-m,
10.5 lb-ft)
I5JB0B150033-01
5) Install oil pump (1) and tighten oil pump bolts to
specified torque.
Tightening torque
Oil pump bolt (a): 24 N·m (2.4 kgf-m, 17.5 lb-ft)
I5JB0B150034-01
(a)
I5JB0B150032-01
I5JB0B150035-01
1
I5JB0B150036-01