Controlling External Com Port Device Access; Controlling Telnet Or Ftp Access - Paradyne FrameSaver SLV 9124 User Manual

Security and Logins

Controlling External COM Port Device Access

Controlling Telnet or FTP Access

4-4
Dial-in access can be controlled when an external device (modem) is connected
to the unit's communication (COM) port. The External Device Commands option
must be set to AT or Other.
Procedure
To control dial-in access:
1. Select the External Modem options.
Main Menu Configuration
External Modem (Com Port)
2. Enable the Dial-In Access configuration option.
This option only appears when the External Device Commands option is set
to AT or Other.
3. Save your change.
See Configuring the COM Port to Support an External Modem
Configuration, for more information about external device communication port
configuration options.
The FrameSaver unit provides several methods for limiting access via a Telnet or
FTP session. Telnet or FTP access can be on a standard management link or on
a service provider's troubleshooting (TS) management link.
March 2000
Management and Communication
in Chapter 3,
9124-A2-GB20-00