Setting Up For Trap Dial-Out; Setting Up An External Modem For Trap Dial-Out; Setting Up Call Directories For Trap Dial-Out - Paradyne FrameSaver SLV 9124 User Manual

Setting Up for Trap Dial-Out

Setting Up an External Modem for Trap Dial-Out

Setting Up Call Directories for Trap Dial-Out

9124-A2-GB20-00
An external modem can be attached to the COM port for dialing out when an
SNMP trap is generated.
To set up an external modem, you need to:
1. Set up SNMP trap managers.
2. Set up an external modem.
3. Set up Modem Directory phone numbers.
4. Configure trap dial-out.
Configuring SNMP NMS Security Options
See
See Setting Up Call Directories for Trap Dial-Out
Configuring SNMP Traps and Trap Dial-Out
See
When trap dial-out is desired, the PC or asynchronous terminal must be
disconnected from the unit's COM port when setup is complete, and an external
modem connected instead. See
Modem
for additional information.
Procedure
1. Set up directory phone numbers.
Main Menu Control
2. Select Directory Number A (for Alarm).
3. Enter the phone number(s).
Valid characters include . . . For . . .
ASCII text
Space,
underscore ( _ ), and
dash (–)
Comma ( , )
B
P
T
W
4. Save the phone number(s).
March 2000
to set up SNMP trap managers.
when trap dial-out is desired.
for trap and alarm information.
Configuring the COM Port to Support an External
Modem Call Directories
Entering the phone number.
Readability characters.
Readability character for a 2-second pause.
Blind dialing.
Pulse dialing, unless B is specified.
Tone dialing, unless B is specified.
Wait for dial tone.
Configuration
3-9