Dlci Alarm Defaults - Netscout Area - Paradyne FrameSaver SLV 9124 User Manual

SNMP MIBs and Traps, and RMON Alarm Defaults
DLCI Alarm Defaults – NetScout Area
Table B-12. Static DLCI Alarm Defaults – NetScout Area (1 of 2)
Sample
Item
Type
Current Latency A
Average Latency A
Frames Received D
Frames Sent D
Tx Frames D
Exceeding CIR
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is contained
in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2
I in the OID = Interface ID of the frame relay link.
D = DLCI number.
B-20
These alarms can be created during RMON initialization or when a DLCI is
created. They are put into the NetScout alarm area. Table B-12 identifies alarm
defaults that do not change, and
when the interface's line speed changes.
The thresholds for these alarms can be edited using NetScout Manager Plus so
they match the values in the SLA between the customer and service provider. Up
to eight alarms per interface are allowed. Any additional alarms are added to the
Paradyne Area alarms and they cannot be changed using NetScout software.
Editing Alarms in Chapter 8, Setting Up NetScout Manager Plus for
See
FrameSaver Devices .
2
1
MIB/Tag/OID
MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyLatest
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.7.I.D
MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyAvg
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.5.I.D
MIB: FR DTE MIB
(RFC 2115)
Tag: frCircuitReceivedFrames
OID: .1.3.6.1.2.1.10.32.2.1.
8.I.D
MIB: FR DTE MIB
(RFC 2115)
Tag: frCircuitSentFrames
OID: .1.3.6.1.2.1.10.32.2.1.
6.I.D
MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciTxFrOutCIR
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.17.I.D
March 2000
Table B-13 identifies alarm defaults that change
Event
Interval
Type
60 secs None
(1 min)
900 secs None
(15 mins)
60 secs None
(1 min)
60 secs None
(1 min)
60 secs None
(1 min)
Rising Falling
Threshold Threshold
Default Default
Must be 0
configured.
Must be 0
configured.
Must be 0
configured.
Must be 0
configured.
Must be 0
configured.
9124-A2-GB20-00