Pvc Loopback; Send Pattern - Paradyne FrameSaver SLV 9124 User Manual

Troubleshooting

PVC Loopback

Send Pattern

6-20
The PVC Loopback loops frames back to the selected interface on a per-PVC
basis. This test logically (not physically) loops back frames received from another
FrameSaver device through the selected frame relay PVC to the same device.
Main Menu Test
Network PVC Loopback
DTE
Main Menu Test
Port PVC Loopback
DTE
PVC # x
PVC # x
This test sends packets filled with a hexadecimal 55 test pattern and sequence
number over the selected interface and DLCI to another FrameSaver device.
To send a pattern test on a link:
Main Menu Test
Send Pattern
If the selected
DLCI is configured as . . . Then . . .
Standard
Multiplexed
If the CIR is zero, the pattern will be sent at a rate of 1000 bps.
March 2000
Network PVC Tests PVC Loopback
PVC # x
Network
PVC # x
98-16186
Data Port PVC Tests PVC Loopback
Network
98-16187
[Network PVC Tests/Data Port PVC Tests]
(Disruptive) appears
after Test
(Non-Disruptive)
appears after Test
And the default
Rate (kbps) setting is . . .
100% of CIR
10% of CIR
9124-A2-GB20-00