Paradyne FrameSaver SLV 9124 User Manual page 159

9124-A2-GB20-00
Table 6-1. Alarm Conditions (3 of 6)
Alarm Condition What It Indicates
LMI Down, The Local Management
2
frame relay link Interface is down for the
specified frame relay link.
2
frame relay link is one of the following:
– Net1-FR1. The frame relay link specified for the network port, Network 1.
– Port-1. The frame relay link associated with the user data port.
March 2000
Troubleshooting
What To Do
For the network interface:
If LMI was never up, verify
that the LMI Protocol setting
reflects the LMI type being
used.
If LMI was never up:
– Verify that the proper time
slots have been configured.
– Verify that the LMI Protocol
setting reflects the LMI type
being used.
Verify that Frame Relay
Performance Statistics show
LMI frames being transmitted.
If all of the above have been
verified and the physical link is
not in Alarm, contact your
network provider.
For user data port:
Check that the DTE cable is
securely attached at both
ends.
Verify that Transmit Clock
Source and Invert Transmit
Clock options are properly
configured.
Verify that Frame Relay
Performance Statistics show
LMI frames being received. If
no frames are being received:
– Check the attached device.
– Verify that the LMI Protocol
setting reflects the LMI type
being used.
6-9