Paradyne FrameSaver SLV 9124 User Manual page 117

9124-A2-GB20-00
Table 5-5. Device Messages (3 of 5)
Message What It Indicates
Limit of PVC New was selected from the
Connections reached PVC Connection Table and
the maximum number of
PVCs has already been
created.
Name Must be Unique Name entered for a
management PVC has
been used previously.
No Destination Link New was selected from the
DLCIs Available PVC Connection Table, but
even though DLCIs are
available to form a
connection, no DLCIs are
available on the network
link, which is a suitable
PVC Destination.
No DLCIs available for New was selected from the
connection PVC Connection Table, but
all configured DLCIs have
been connected.
No DLCIs available for New was selected from the
connection Management PVCs option
screen, but all Link/DLCI
pairs have been connected.
No DLCIs Available for New was selected from the
Mgmt PVC Management PVCs option
screen, but all configured
DLCIs have been
connected.
No DLCIs Defined DLCI Records was selected
from an interface's
Configuration Edit/Display
menu, and no DLCI
Records have been created
for this interface.
No more DLCIs New or CopyFrom was
allowed selected from an interface's
DLCI Records configuration
screen, and the maximum
number of DLCI Records
had already been reached.
March 2000
Operation and Maintenance
What To Do
Do not create the PVC
connection.
Delete another PVC
connection, and try again.
Enter another 4-character name
for the logical/management link.
Configure additional DLCIs for
the network link and try again.
No action needed, or configure
more DLCIs and try again.
Configure more network and/or
Port-1 Links/DLCIs pairs and try
again.
Configure more network and/or
Port-1 DLCIs and try again.
Select New and create a DLCI
record.
Delete a DLCI, then create the
new DLCI Record.
5-9