Paradyne FrameSaver SLV 9124 User Manual page 118

Operation and Maintenance
5-10
Table 5-5. Device Messages (4 of 5)
Message What It Indicates
No Primary New or Modify was
Destination Link selected from the PVC
DLCIs Available Connection Table, but even
though DLCIs are available
to form a connection, no
DLCIs are available on the
network link, which is a
suitable Primary PVC
Destination.
No Security Records Delete was selected from
to Delete the Administer Login
screen, and no security
records had been defined.
Password Matching Password entered in the
Error – Re-enter Re-enter Password field of
Password the Administer Logins
screen does not match
what was entered in the
Password field.
Permission Denied A file transfer was
attempted, but the:
(Seen at an FTP
terminal.)
Please Wait Command takes longer
than 5 seconds.
Resetting Device, Yes (or y) was entered in
Please Wait ... the Reset COM Port usage
field of the System Paused
menu.
March 2000
User did not have
Level 1 security.
Wrong file was specified
when the put command
was entered.
User attempted to
upload a program file
from the unit.
What To Do
Configure additional DLCIs for
the network link and try again.
If a network DLCI has been
entered as a Source DLCI:
1. Change the Source DLCI to a
user data port DLCI.
2. Enter the network DLCI as the
PVC's Primary Destination.
No action needed.
Enter a security record.
Try again.
Contact your system
administrator to verify your
password.
See your system administrator
to get your security level
changed.
Try again, entering the correct
file with the put command.
Enter the put command
instead of a get command;
you can only transfer files to
the unit, not from it.
See Upgrading System
Software .
Wait until message clears.
No action needed.
9124-A2-GB20-00