Paradyne FrameSaver SLV 9124 User Manual page 125

9124-A2-GB20-00
Table 5-7. Health and Status Messages (4 of 4)
Message
Time Slot Discovery in Progress,
Network 1
Yellow at DSX-1
Yellow at Network 1
Test Status Messages
These test messages appear in the right column of the System and Test Status
screen. You have the option of allowing the test to continue or aborting the test.
See Chapter 6, Troubleshooting
start and stop them.
Table 5-8. Test Status Messages (1 of 2)
Message
DCLB Active, [Net1-FR1/Port-1]
DTE External LB Active, Port-1
DTE Init. Ext LB Active, Port-1
DTPLB Active, Port-1
Lamp Test Active
1
nnnn indicates a DLCI number of 16 through 1007.
2
frame relay link is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-1. The frame relay link associated with the user data port.
March 2000
Operation and Maintenance
What It Indicates
Time slot discovery is currently taking place to
determine the time slots that will be used for frame
relay traffic on the network interface.
This message only appears when the Time Slot
Discovery option is enabled ( Main Menu
Configuration Time Slot Assignment
Relay Network Assignments) and an LMI failure is
detected on the network interface's frame relay
link.
A yellow alarm signal is received on the DSX-1
interface. DTE has detected a LOS or OOF
condition.
A yellow alarm signal is received on the network
interface. Possible reasons include:
Network cable problem.
T1 facility problem.
, for more information on tests, including how to
What It Indicates
A Data Channel V.54 Loopback (DCLB) is active
on the T1 network frame relay link, or on the data
for the user data port.
An external DTE Loopback is running on the user
data port.
The DTE has initiated an external DTE Loopback
on the user data port.
A Data Terminal Payload Loopback (DTPLB) is
active for the specified slot and port.
The Lamp Test is active, causing the LEDs on the
faceplate to flash on and off.
Frame
5-17