Interfaces Group (Mib-2; Paradyne Indexes To The Interface Table (Iftable - Paradyne FrameSaver SLV 9124 User Manual

SNMP MIBs and Traps, and RMON Alarm Defaults

Interfaces Group (mib-2)

Paradyne Indexes to the Interface Table (ifTable)

B-4
Clarification for objects in the Interfaces Group, as defined in RFC 1573 and
RFC 1213, which is an SNMPv1 MIB, is provided in this section.
The following table provides the ifName for each interface type, the ifDescr, and
the ifIndex that Paradyne has assigned to each.
Table B-1. Paradyne Interface Objects Information
ifName Description
Physical Layer
Network T1 T1 network interface
DSX-1 T1 DSX-1 interface
Sync Data Port Synchronous Data
S01P1 Port-1
COM Communications port
Frame Relay Logical Layer
FR UNI Frame relay logical
link on the T1 network
interface
Frame relay logical
link on the
Synchronous Data
Port-1
March 2000
ifDescr (ifEntry 2)
Network T1; T1 FR NAM;
Hardware Version: hhhh-hhh
DSX-1 T1; T1 FR NAM;
Hardware Version: hhhh-hhh
Synchronous Data Port, Slot: 1,
Port: 1; T1 FR NAM; Hardware
Version: hhhh-hhh
COM Port; T1 FR NAM;
Hardware Version: hhhh-hhh
For the DTE side:
Network T1 of FR DTE;
T1 FR NAM; Hardware Version:
hhhh-hhh
For the DCE side:
Network T1 of FR SERVICE;
T1 FR NAM; Hardware Version:
hhhh-hhh
For the user side:
Synchronous Data Port of
FR DTE, Slot: 1, Port: 1;
T1 FR NAM; Hardware Version:
hhhh-hhh
For the network side:
Synchronous Data Port of
FR SERVICE, Slot: 1, Port: 1;
T1 FR NAM; Hardware Version:
hhhh-hhh
ifIndex
101001001
101002001
101003001
101004001
101015001
101016001
9124-A2-GB20-00