Paradyne FrameSaver SLV 9124 User Manual page 126

Operation and Maintenance
5-18
Table 5-8. Test Status Messages (2 of 2)
Message
LLB Active, [Network 1/DSX-1]
Monitor Pttn Active, DLCI nnnn ,
1, 2
frame_relay_link
Monitor Pttn Active, [Interface]
No Test Active
PLB Active, [Network 1/DSX-1]
PVC Loopback Active, DLCI nnnn ,
1, 2
frame_relay_link
RLB Active, [Network 1/DSX-1]
Send Pttn Active, DLCI nnnn ,
1, 2
frame_relay_link
Send Pttn Active, [Interface]
1
nnnn indicates a DLCI number of 16 through 1007.
2
frame relay link is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-1. The frame relay link associated with the user data port.
March 2000
What It Indicates
A network Line Loopback (LLB) is active on the
specified interface.
The unit is monitoring a test pattern on the
specified DLCI on the specified frame relay link.
A Monitor Pattern test is active on the specified
interface.
This test cannot be activated on user data ports
that have Port Use set to Frame Relay.
No tests are currently running.
A Payload Loopback (PLB) is active on the
specified interface.
A PVC Loopback is active on the specified DLCI
on the frame relay link.
A network Repeater Loopback (RLB) is active on
the specified interface.
The unit is monitoring the selected test pattern on
the specified DLCI for the interface.
A Send Pattern test is active on the specified
interface.
This test cannot be activated on user data ports
that have Port Use set to Frame Relay.
9124-A2-GB20-00