Resetting The Unit And Restoring Communication; Resetting The Unit From The Control Menu; Resetting The Unit By Cycling The Power - Paradyne FrameSaver SLV 9124 User Manual

Resetting the Unit and Restoring Communication

Resetting the Unit from the Control Menu

Resetting the Unit By Cycling the Power

9124-A2-GB20-00
You can reset the unit in one of four ways:
Reset it from the Control menu.
Cycle the power.
Reset the configuration options for the COM port, or reload the factory default
settings.
Set the appropriate MIB object from NMS (see your NMS documentation).
The unit performs a self-test when it is reset.
Use this procedure to initiate a reset and power-on self-test of the unit.
Procedure
To reset the unit from the Control menu:
1. From the Main Menu screen, select Control.
2. Select Reset Device and press Enter. The Are You Sure? prompt
appears.
3. Type y ( Yes) and press Enter. The unit reinitializes itself, performing a
self-test.
Disconnecting, then reconnecting the power cord resets the unit.
March 2000
Troubleshooting
6-3