Device Messages - Paradyne FrameSaver SLV 9124 User Manual

Device Messages

9124-A2-GB20-00
These messages appear in the messages area at the bottom of the screens.
All device messages are listed in alphabetical order.
Table 5-5. Device Messages (1 of 5)
Message What It Indicates
Access level is n , User's access level is 2
Read-only. or 3; user is not authorized
to change configurations.
Already Active Test selected is already
running.
Blank Entries New had been selected
Removed from the Administer Logins
screen, no entry was made,
then Save was selected.
Cannot delete Trap De l ete was selected from
Manager the Management PVCs
Options screen, but the
PVC had been defined as a
trap destination.
Command Complete Configuration has been
saved or all tests have
been aborted.
Connection Refused Two menu-driven user
interface sessions are
(Seen at an FTP
already in use when a
terminal.)
Telnet session was
attempted.
Destination Not Destination entered is
Unique already being used.
DLCI in connection. User tried to delete a DLCI
Delete connection first that was part of a
connection.
Duplicate DLCI DLCI number entered is not
Number unique for the frame relay
link.
File Transfer Complete A file transfer was
performed successfully.
(Seen at an FTP
terminal.)
March 2000
Operation and Maintenance
What To Do
No action needed.
Allow test to continue.
Select another test.
Stop the test.
No action needed.
Reenter the Login ID,
Password, and Access Level.
No action needed, or configure
another path for traps and try
again.
No action needed.
Wait and try again.
Enter another destination
indicator.
No action needed, or
Delete the connection, then
delete the DLCI.
No action needed; previous
contents of the DLCI number
field is restored.
Switch to the newly downloaded
software.
See Changing Software .
5-7