Traps: Rmon-Specific - Paradyne FrameSaver SLV 9124 User Manual

SNMP MIBs and Traps, and RMON Alarm Defaults

Traps: RMON-Specific

B-14
Two traps are defined to support the Alarm and Events Groups of RMON. See
RMON Alarm and Event Defaults
RMON-specific traps.
Table B-8. RMON-Specific Traps and Variable-Bindings
Trap Variable-Bindings
risingAlarm
fallingAlarm
March 2000
for the default values that will generate
alarmIndex (RFC 1757)
alarmVariable
(RFC 1757)
alarmSampleType
(RFC 1757)
alarmValue (RFC 1757)
alarmRisingThreshold or
alarm Falling Threshold
(RFC 1757)
devLastTrapString
(devHealthAndStatus.-
mib)
alarmIndex (RFC 1757)
alarmVariable
(RFC 1757)
alarmSampleType
(RFC 1757)
alarmValue (RFC 1757)
alarmFallingThreshold
(RFC 1757)
devLastTrapString
(devHealthAndStatus.-
mib)
Possible Cause
Object being monitored has risen
above the set threshold.
String:
'Change in $variableName
$typeString threshold of
$alarmRisingThreshold by
$(alarmValue –
AlarmRisingThreshold.'
(e.g., Octets received on
Network T1 frame relay rose
to threshold of 1.')
Object being monitored has
fallen below the set threshold.
String:
'Change in $variableName
$typeString threshold of
$alarmFallingThreshold by
$(alarmValue –
AlarmFallingThreshold.'
(e.g., Octets received on
Network T1 frame relay fell
to threshold of 1.')
9124-A2-GB20-00