Selecting From A Menu; Switching Between Screen Areas - Paradyne FrameSaver SLV 9124 User Manual

User Interface and Basic Operation

Selecting from a Menu

Switching Between Screen Areas

2-8
Procedure
To select from a menu:
1. Tab or press the down arrow key to position the cursor on a menu selection,
or press the up arrow key to move the cursor to the bottom of the menu list.
Each menu selection is highlighted as you press the key to move the cursor
from position to position.
2. Press Enter. The selected menu or screen appears.
Procedure
To return to a previous screen, press the Escape (Esc) key until you reach the
desired screen.
Use Ctrl-a to switch between screen areas (see the example on
Procedure
To switch to the function keys area:
1. Press Ctrl-a to switch from the screen area to the function keys area.
2. Select either the function's designated (underlined) character or
Tab to the desired function key.
3. Press Enter. The function is performed.
To return to the screen area, press Ctrl-a again.
March 2000
page 2-5).
9124-A2-GB20-00