Paradyne FrameSaver SLV 9124 User Manual page 128

Operation and Maintenance
5-20
Table 5-9. Network LMI-Reported DLCIs Status
Field Status
DLCI 16 through 1007
Status
Active
Inactive
Deleted
New
CIR (bps) 0 –1536000
1
Appears for 10 seconds only, before the network changes Deleted to Inactive
and New to Active.
March 2000
What It Indicates
Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface – the
identifying number assigned to the path
between two frame relay FrameSaver
units' ports.
DLCI statuses are listed in ascending
order ( i.e., lowest number first ).
LMI-reported status of the DLCI:
Whether the DLCI is active (capable
of carrying data) in the frame relay
network,
Whether it is inactive in the frame
relay network,
1
Whether it has been deleted by the
frame relay network, or
1
Whether it has been created by the
frame relay network.
Displays the committed information rate
reported by the Stratacom switch. CIR
information only appears in this column
when LMI Protocol is set to Standard.
If blank, the switch does not support this
feature.
9124-A2-GB20-00