Setting Up The Packaging Mode - Doosan M0609 User Manual


When you make changes to the settings, the changes are reflected in real time in the
simulation pane on the left.
3
When you have finished configuring the settings, tap the X button to close the pane.

10.5.2 Setting up the packaging mode

To configure the packaging mode, follow these steps:
1
In the status pane, tap the Safe Recovery button.
2
In the Safe Recovery screen pane, select the Pack/Unpack tab.
3
On the packaging mode screen, enable the Package Mode toggle button.
Doosan Robotics User Manual v1.7 112