Doosan M0609 User Manual page 139

To configure the screen saver mode, follow these steps:
1
Tap the "Settings" button on the main menu and select Screen Saver.
2
Screen saver use can be configured in the Screen Saver Setting screen.

The default setting is Use Screen Saver.
3
This configures the time required to elapse before entering the screen saver mode.

Default: 5 minutes

Minimum Time: 1 minute

Maximum Time: 24 hours (1440 minutes)
4
Tap the "OK" button.
12.12 Idle Servo Off
If the robot is idle for a certain amount of time, the robot is automatically set to the Safety Off
state. The default value is 5 minutes, and the time can be changed to a time the user prefers.
139