Information on tasks to execute from the external device is appears.
Motion inputs from the external device can only be executed if a green signal is displayed on
the "Enable Remote Control" button.
If a red signal is displayed on the Enable Remote Control button, input an enable signal from
the external device.
12.4
Change and Disable Password
A password is required to enter a setting with a lock icon (
To change or disable the password of settings with a lock icon, follow these steps:
1
Select [Password] - [Safety Password] from Menu.
2
Enter the current password of the program and tap the "OK" button.
The initial system password is admin.
To disable the password, tap the "Password Lock" button and disable.
3
Tap the "OK" button.
Note
If the user forgets the password, the system must perform factory reset.
12.5
User Role Setting
Accessible menus can be limited according to user roles.
1
Select [Password] - [User Role] from Menu.
The User Role On/Off, description of user role and Change Password buttons are appeared in
the settings management window.
Doosan Robotics User Manual v1.7
).
132