Table of Contents
Advertisement
The Truck Assist system is used for communication between the driver of the paver
A
and the driver of the material truck. The corresponding signal system shows the truck
driver which action to perform (reversing / stop / tip material / depart).
NOTE
Item Designation
Tell truck to
38
reverse
Tell truck to inter-
39
rupt reversing -
"STOP"
Caution! Possible material damage through
insufficient instruction
Ignored or incorrectly understood signals can cause dam-
age to the paver and/or material truck!
- The paver driver and all drivers of the material trucks
must be instructed in how the Truck Assist system works
and understand the system.
- Comply with all further information in the operating
instructions and in the safety manual.
Brief description
Pushbutton function with LED feedback:
- To change over to the "Start Revers-
ing" signal.
(GREEN SIGNAL)
- Press button again to change signal
over to "Stop".
Button LED (39) on + (RED SIGNAL).
- Press button once more to switch
again to "Start Reversing" signal.
(GREEN SIGNAL)
Button (39) can also be used to change
A
over to "Stop".
Pushbutton function with LED feedback:
- To change over to the "STOP" signal.
(RED SIGNAL)
Set "STOP" signal to interrupt procedure
A
or on reaching correct distance between
truck and paver.
LED display
D 11.18 23
Advertisement
Table of Contents
