Table of Contents
Advertisement
Version
2:
3b
3a
3
- Connect the pump lever (1) to the pump (2).
- Tighten bolts (3) on both sides of the roof.
- Set the adjustment lever (4) to the "Raise" or "Lower" position.
- Operate the pump lever (1) until the roof has reached the upper or lower
limit position.
- Bolt (3) must be inserted in the corresponding hole on both sides of the roof:
- Position (3a): Roof raised.
- Position (3b): Roof lowered.
- Secure bolt with split pin (3c).
D 30.18 4
3c
2
4
1
Advertisement
Table of Contents
