Table of Contents
Advertisement
Central lubrication system
Check filling level
The lubricant tank should always be
A
filled sufficiently so that the system can-
not "run dry", ensuring sufficient drive
chain lubrication and eliminating the
need for time-consuming bleeding of
the system.
- Always maintain a fill level above the
"MIN" mark (A) on the tank.
Top up lubricant tank
A
- A filler hose (B) is located on the lubricant tank (A) for filling purposes.
- Connect the grease gun (C) included with the scope of supply to the filler hose (B)
and fill the lubricant tank (A) up to the MAX mark.
Alternatively, the lubricant tank can be filled with a standard grease gun at the lu-
bricating nipple (D).
When the lubricant tank is completely empty, the pump may have to run for up to 10
A
minutes until the full delivery rate is achieved after filling.
F 90.18 4
D
B
A
C
Advertisement
Table of Contents
