Fayat Group DYNAPAC SD1800C Manual page 379

1.2 Points of maintenance
Auger drive chains (1)
To check the chain tension:
- Manually turn both augers to the right
and left. In this case, movement clear-
ance (C) at the augers' outer circumference should be 3-4 mm.
f Risk of injury due to sharp-edged parts!
To re-tension the chains
- Release the mounting screws (A).
- Adjust chain tension with the adjusting
screws (B):
- Retighten the bolts (A).
B
C
A
F 40.18 5