Table of Contents
Advertisement
3
Transportation on low-bed trailers
m
Reduce the paver finisher and the screed to their basic widths; also remove any at-
tached side plates.
The maximum approach angle is indicated in the section entitled "Technical data"!
m
Check the fill level of the operating substances so that these do not escape when driv-
ing on an incline.
m
Attachment and loading equipment must meet the conditions of the applicable acci-
dent prevention regulations!
m
The weight of the paver finisher must be taken into consideration when selecting the
attachment and loading equipment!
3.1
Preparations
- Prepare the paver finisher for transportation (see chapter D).
- Remove all overlaying or loose parts from finisher and screed (see also operating
instructions for the screed). Store these parts in a safe place.
m
Move the auger to the uppermost position to avoid collisions!
f
When screed is operated with the optional
gas heating system:
- Remove the gas bottles for the screed heater:
- Close the main shut-off valves and the bottle valves.
- Turn off the valves on the bottles and remove the gas
bottles from the holder.
- Transport the gas bottles on a second vehicle; heed all applicable safety regulations.
C 11.18 3
Advertisement
Table of Contents
