Table of Contents
Advertisement
Screed control with paver finisher stop / in paving operation
(screed stop / paving stop / floating paving)
Button (70) can be used to activate the following functions:
- Screed stop / floating position (OFF)-->(LED OFF)
- Screed is hydraulically held in position.
Function for setting up the paver finisher and for lifting/lowering the screed
A
- Paving stop / floating paving (ON)-->(LED ON)
The following functions are active depending on operating status:
- "Paving stop": when the paver finisher is stationary.
Screen is held hydraulically and by the counter pressure of the material.
- "Floating paving": during paving operation.
Lower the screed to the floating position.
Function for paving operation.
A
- To lift the screed press switch (69).
- To lower the screed:
- Resting function: Keep button (70) pressed for longer than 1.5 seconds.
The screed is lowered as long as the button is pressed. When the button is re-
leased, the screed is stopped again.
- Button function: Press button (70) briefly - the screed is lowered. Press the button
briefly again - the screed is stopped.
D 41.18 28
Advertisement
Table of Contents
