Kemppi MasterTig 325DC Operating Manual page 68

MASTERTIG
Feature
Voltage supply for cooling
unit
Recommended generator
power (min)
Wireless communication
type:
- Control panels MTP23X,
MTP33X, MTP35X
- Remote controls HR45,
(2
FR45
Wired communication type
Arc striking voltage
Stick electrode diameters
TIG welding cable con-
nection type
Standards
1)
In AU power source models with the Voltage Reduction Device (VRD) function locked on, only this value is applicable.
NO: These devices are not allowed to be used within a 20 km radius of the centre of Ny-Ålesund at Svalbard,
2)
Norway. This restriction applies to any 2-32 GHz transmitter operation.
3)
Applies only to the power source model versions where the VRD function is locked on.
© Kemppi
Description
U
cu
S
gen
Transmitter fre-
quency and
power
(2
Remote
CAN BUS
ø mm
325DC 325DC G
Value
380...460 V 380...460 V
20 kVA 20 kVA
2.4 GHz Bluetooth, 2.4 GHz Bluetooth,
2400-2483.5 MHz, 10 2400-2483.5 MHz, 10
dBm dBm
Analog Analog
Kemppi Remote-Bus Kemppi Remote-Bus
5...11 kV 5...11 kV
1.6...6.0 mm 1.6...6.0 mm
R1/4 R1/4
IEC 60974-1,-3,-10 IEC 60974-1,-3,-10
IEC 61000-3-12 IEC 61000-3-12
(3
AS 60974.1-2006 AS 60974.1-2006
GB 15579.1 GB 15579.1
68
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
325DC GM
220...460 V
20 kVA
2.4 GHz Bluetooth,
2400-2483.5 MHz, 10
dBm
Analog
Kemppi Remote-Bus
5...11 kV
1.6...6.0 mm
R1/4
IEC 60974-1,-3,-10
IEC 61000-3-12
(3
AS 60974.1-2006
GB 15579.1
(3
1920900 / 2215