Kemppi MasterTig 325DC Operating Manual page 49

To adjust settings:
1. Go to the Settings view.
2. Turn the control knob (1) to browse through the settings groups and parameters.
3. Select a parameter to be adjusted or changed by pressing the control knob button (1).
4. Adjust or change the setting by turning the control knob (1).
5. Close the parameter setting by pressing the control knob button (1).
Some of the settings are e.g. current mode and welding process specific and are visible or not visible in the settings
menu accordingly.
Common welding settings:
Parameter
Welding process
Current limit min
Current limit max
Remote control mode
Remote control min
Remote control max
Button remote channel control
Wireless remote
TIG settings:
Parameter
Balance limit min
Balance limit max
Lift TIG current
HF spark force
Positive ignition current
Positive ignition time
Negative ignition current
© Kemppi
Value
TIG / MMA (Default = TIG)
TIG: 2 A / MMA: 8 A, step 1 A *
TIG: power source's nominal value /
MMA: power source's max. MMA current,
step 1 A *
OFF / Remote / Torch (Default = OFF)
Min = "Current limit min", Max = "Current
limit max"
Min = "Current limit min", Max = "Current
limit max"
OFF / ON (Default = OFF)
Pairing starts automatically when selec-
ted
Value
-99 ... 0, step 1 (Default = -60)
0 ... +20, step 1 (Default = 0)
5 A ... 40 A / Auto, step 1 A (Default =
Auto = 10 A)
50 % ... 110 %, step 1 % (Default = 100 %)
30 % ... 150 % / Auto, step 1 % (Default =
Auto)
0 ms ... 50 ms / Auto, step 10 ms (Default
= Auto)
(ACDC): 100 % ... 300 % / Auto, Step 1 %
(Default = Auto)
49
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
Note
Selecting a welding process changes
automatically to the last active channel
for the selected process.
When a remote control or a torch remote
control is selected, the welding current
adjustment on the control panel is dis-
abled.
New pairing information replaces the old
information.
Pairing status is shown as the settings
value.
Note
1920900 / 2215