Kemppi MasterTig 325DC Operating Manual page 40

With MasterTig DC power sources, the aluminum (Al) selection is not available as a welded material.
3. Confirm the Weld Assist's recommendation for welding settings by selecting 'Apply'.
Tip: You can go back step by step in Weld Assist by pressing the left function button (2). Selecting Cancel with
the right function button (3), you can cancel Weld Assist recommendations and return to the beginning.
Weld Assist automatically sets the following parameters for you:
• Current mode: AC / DC-
• Current: Depends on the machine used
• Pulse (if used): Frequency
• AC and Start & stop parameters: Set to default.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
40
Operating manual - EN
1920900 / 2215