Kemppi MasterTig 325DC Operating Manual page 42

3. Confirm the Weld Assist's recommendation for welding settings by selecting 'Apply'.
Weld Assist automatically sets the following parameters for you:
• Current: Depends on the machine used
• Hot start
• Arc force
• Arc break
• DC+ indicates polarity (in this case the electrode holder is connected to the positive (+) DIX connector).
All these parameters can still be modified as per normal for the actual welding.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
42
Operating manual - EN
1920900 / 2215