Kemppi MasterTig 325DC Operating Manual page 33

Settings:
Parameter
Latest weld
AC Waveform
Spot time
MIX TIG AC ratio
MIX TIG cycle time
MIX TIG DC level
MicroTack spot time
MicroTack pause time
MicroTack spot count
Arc force
Hot start
VRD
MMA Antifreeze
HF spark force
TIG antifreeze
Remote mode
Remote control min
Remote control max
Wireless remote
Water cooler
Weld data time
Display off
Date
Time
Language
Time counter
© Kemppi
Value
Current, voltage, arc time
Sine / Optima / Square (Default: Optima)
0.1 s ... 150.0 s, step 0.1 / 1.0 s (Default =
2.0 s)
10 % ... 90 %, step 1 % (Default = 50 %)
0.1 s ... 1.0 s, step 0.1 s (Default = 0.6 s)
50 % ... 150 %, step 1 % (Default = 100 %)
1 ms ... 200 ms, step 1 ms (Default = 10
ms)
50 ms ... 500 ms, step 1 ms (Default = 50
ms)
1 ... 5, Endless (Default = 1)
-10 ... +10 , step 1 (Default = 0)
-10 ... +10 , step 1 (Default = 0)
OFF / ON (Default = OFF)
OFF / ON (Default = ON)
50 % ... 110 %, Step 1 % (Default 100 %)
OFF / ON (Default = OFF)
OFF / Remote / Torch (Default = OFF)
Min = "Current limit min", Max = "Current
limit max"
Min = "Current limit min", Max = "Current
limit max"
Cancel / Start (Start pairing)
OFF / Auto / ON (Default: Auto)
OFF / 1 s ... 10 s, step 1 s (Default = 5 s)
5 min ... 120 min, step 1 min (Default = 5
min)
Date setting (DD/MM/YYYY)
Time setting (HH:MM)
Select language from the list
Total arc time and power on time
33
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
Note
This settings item shows last weld data
values.
In AU VRD (Voltage Reduction Device) ver-
sion: Default ON, OFF disabled.
Set the day by pressing and turning the
control knob. Once the day is set, press
the control knob button to set the month
etc.
Set the hour by pressing and turning the
control knob (use 24 h format). Once the
hour is set, press the control knob button
to set the minutes.
1920900 / 2215