Operating Power Source - Kemppi MasterTig 325DC Operating Manual

3.1 Operating power source

1. Turn the power source ON. The power switch is located in the rear.
2. Depending on your control panel type, wait approximately 15 seconds for the system to start up.
For control panel operation, refer to:
• "Operating control panels MTP23X and MTP33X" on the next page
• "Operating control panel MTP35X" on page 36
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
26
Operating manual - EN
1920900 / 2215