Kemppi MasterTig 325DC Operating Manual page 39

Using Weld Assist with TIG welding
1. Go to the Weld Assist view and select 'Start' with the control knob button (1).
2. Select:
>> The material you are about to weld: Fe (mild steel) / Ss (stainless steel) / Al (aluminum).
>> The welded material's thickness (0.5 ... 10 mm).
>> The welding joint type: butt joint / corner joint / edge joint / lap joint / fillet joint / tube joint / tube+plate joint.
>> The welding position: PA / PB / PC / PD / PE / PF / PG.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
39
Operating manual - EN
1920900 / 2215